The heat fusion butt welder mainly connects two plastic pipes by melting them at the connecting part through the combination of heat and pressure. The basic steps are as follows: 1. Preheating: Firstly, the heating plate of the hot melt butt welder is preheated to a specified temperature. This temperature is usually around 200°C, depending on the type of plastic material to be welded (e.g. PE, PP, etc.). 2. Clamping: The end of the pipe to be welded is placed on both sides of the heating plate and clamped hydraulically or mechanically. The purpose of clamping is to ensure the stability of the pipe during the welding process and to avoid any displacement. 3. Heating and melting: In the clamped state, the end of the pipe comes into contact with the heating plate, and after a certain period of time (usually from a few seconds to a dozen seconds), the contact surface of the pipe will reach a molten state, forming a molten plastic layer. 4. Welding: When the pipe reaches a predetermined melting temperature, the heating plate is quickly removed and a certain pressure is applied to the end of the pipe. At this point, the molten plastic will quickly fuse together to form a strong welded joint. 5. Cooling and curing: While pressure is applied, the weld is held until it cools. During the cooling process, the molten plastic gradually solidifies to form a strong welded joint. This stage usually takes a few minutes to ensure that the weld is fully cured.

The heat fusion butt welder has a number of technical advantages that make it the equipment of choice for connecting plastic pipes: 1. High-strength connection: the strength of the joint produced by heat fusion welding is higher than the strength of the pipe body, ensuring the reliability of the overall system. 2. Corrosion resistance: due to the characteristics of the plastic itself, heat fusion welding joints have good corrosion resistance, suitable for use in the chemical industry, sewage treatment and other fields. 3. Convenient construction: The heat fusion butt welding machine is easy to operate, suitable for use in a variety of construction environments, reducing the complexity and uncertainty of manual welding. 4. Environmental protection: the hot melt welding process does not require the use of any chemical adhesive, avoiding pollution of the environment, in line with the requirements of sustainable development.

With its unique working principle and significant technical advantages, heat fusion butt welding machine has become an indispensable equipment in plastic pipe connection. Through the effective welding method, it not only improves the connection quality of pipes, but also ensures the overall reliability of the project. With the continuous progress of technology, hot melt butt welding machine will show its application potential in more fields.