Problem manifestation：Air bubbles appear inside or on the surface of welded joints, resulting in poor sealing and easy leakage.

    Solution：1.Control the heating temperature: Avoid too high heating temperature, which will cause the material to decompose and produce gas. Excessive heating temperature will cause the material to decompose, releasing gas and forming bubbles.2.Uniform heating: Ensure the temperature of the heating plate is uniform, and the end surface of the pipe is heated evenly during the heating process to avoid local overheating.3.Adjustment of welding pressure and time: Reasonably adjust the welding pressure and docking time to ensure that the melted material is fully fused and the internal gas is discharged.

    Problem Performance：The joints are not aligned after welding, affecting the integrity and aesthetics of the piping system.

    The Solution：1.Use an alignment fixture: Use an alignment fixture to hold the pipe in place prior to welding to ensure that the pipe ends are aligned. The alignment fixture can effectively prevent the pipe from moving during the welding process.2.Adjust the welding pressure: Adjust the welding pressure reasonably to avoid the pipe moving out of position due to excessive pressure.3.Carefully align the end surfaces: Before heating and butt jointing, carefully check and align the pipe end surfaces to ensure that they are flat and parallel to each other.

    Problem manifestation：There is leakage from welded joints, affecting the sealing and operational safety of the pipework system.

    The Solution：1.Check welding parameters: Make sure the welding temperature, pressure and time are set correctly to achieve the best welding results.2.Ensure material quality: Choose reliable piping materials and avoid using poor quality materials. Inferior materials may have impurities or unstable material properties, affecting the quality of the weld.3.Enhance operation training: Improve the skill level of operators to ensure that the welding process is carried out in strict accordance with the operating specifications. Improper operation may lead to quality problems of welded joints.

    Problems：The surface of welded joints is uneven, with pits or weld lumps, affecting the aesthetics of the piping system and the flow of fluids.

    The Solution：1.Control of heating time and temperature: Avoid excessive heating that leads to uneven material flow. Excessive heating time or high heating temperatures will result in excessive material flow and the formation of uneven joints.2.Use uniform pressure: Maintain uniform pressure during the butt jointing process, avoiding too much or too little pressure. Uniform pressure ensures even material flow and a flat joint.3.Trimming the end face: Before welding, use an end mill to trim the end face of the pipe to ensure that the end face is flat and smooth.

    Problem manifestation：Welding equipment malfunctioned and did not work properly, affecting welding progress.

    Solution：1.Regular maintenance of the equipment: carry out regular maintenance and repair according to the instruction manual of the equipment, and replace the wearing parts in time. Regular maintenance can prolong the service life of the equipment and reduce the occurrence of failures.2.Check the power supply and line: Make sure the power supply voltage is stable, and check whether the power line and control line are normal. Unstable power supply or line failure will affect the normal work of the equipment.3.Contact after-sales service: When equipment failure occurs, contact the manufacturer's after-sales service in time for maintenance and technical support. The manufacturer's after-sales service can provide professional maintenance and technical support to ensure the normal operation of the equipment.

    Various problems may be encountered during the plastic pipe welding process, but through correct operation and timely solutions, the welding quality can be effectively improved to ensure the stability and safety of the piping system. Operators should be proficient in welding technology, operate in strict accordance with the operating specifications, and regularly maintain the welding equipment to ensure that the welding process is carried out smoothly. We hope that the above common problems and solutions can help you in the actual operation and improve the success rate of plastic pipe welding and project quality.