WP-J Series PE/HDPE Rotary Pipe Cutter | 13–200mm Manual Plastic Pipe Cutting Tool
- group name
- PE Pipe Cutting
- Min Order
- 1 piece
- brand name
- Fusion Equipment and Plumbing Tool｜WELPING
- model
- WP63J /110J /200J
- Nearest port for product export
- Shanghai, Ningbo
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FCA, DDU, Express Delivery
- Acceptable payment methods
- T/T, L/C, MoneyGram, Credit Card, PayPal, Westem Union
- update time
- Wed, 20 May 2026 07:38:20 GMT
Paramtents
Product Name PE/HDPE Rotary Pipe Cutter
Cutting Range 13–200 mm
Applicable Pipe Material PE / HDPE plastic pipe
Operation Type Manual
Product Type Plastic pipe cutting tool
Category Pipe Tool / HDPE Pipe Cutters
OEM Service Available
Packging & Delivery
-
Min Order1 piece
Briefing
Manual rotary pipe cutter for PE and HDPE pipes, available in 13–63mm, 50–110mm, and 110–200mm cutting ranges. Suitable for pipe installation, repair, and field cutting work.
Detailed
WP-J Series PE/HDPE Rotary Pipe Cutter
Product Overview
The WP-J Series PE/HDPE Rotary Pipe Cutter is designed for manual cutting of PE and HDPE plastic pipes. Compared with saw cutting, the rotary cutting method helps reduce plastic chips and keeps the pipe end cleaner during on-site work.
The series includes three models: WP63J, WP110J, and WP200J, covering pipe sizes from 13mm to 200mm. It is suitable for pipe installation, repair work, and on-site cutting where a simple and portable tool is needed.
Model Selection
| Model | Cutting Range | Recommended Use |
| WP63J | 13–63 mm | Small-diameter PE / HDPE pipes |
| WP110J | 50–110 mm | Medium pipe sizes for installation work |
| WP200J | 110–200 mm | Larger PE / HDPE pipes on site |
Selection Tip:
Choose the model according to the outside diameter of the pipe. For wider working coverage, WP110J and WP200J can be selected together for medium and large pipe cutting jobs.
Rotary Cutting Structure
The cutter uses a rotary cutting design. During operation, the tool is placed around the pipe, and the cutting wheel gradually cuts into the pipe wall as the operator rotates the cutter around the pipe.
This structure is suitable for PE and HDPE pipes because it provides controlled cutting without producing large amounts of chips or dust.
Product Features
Rotary Cutting Design
Clean cutting for PE and HDPE pipes.
Manual Operation
No power supply required for field use.
13–200 mm Cutting Range
Three models available for different pipe sizes.
Portable & Easy to Use
Suitable for installation, repair, and on-site pipe cutting.
Application Scenarios
The WP-J Series PE/HDPE Rotary Pipe Cutter can be used for:
· PE pipe installation
· HDPE pipe repair work
· Water supply pipe projects
· Gas pipe preparation work
· Irrigation pipe installation
· On-site pipe cutting before welding or connection
How to Use
1.“Select the correct cutter model according to the pipe diameter.”
2.“Place the cutter around the pipe.”
3.“Adjust the cutting wheel until it contacts the pipe surface.”
4.“Rotate the cutter around the pipe.”
5.“Gradually tighten the cutting wheel during rotation.”
6.“Continue rotating until the pipe is fully cut.”
FAQ
Which pipe materials can this cutter be used for?
It is mainly used for PE and HDPE plastic pipes.
Does it need electricity?
No. This is a manual rotary pipe cutter and does not require electricity.
Which model should I choose?
Choose the model according to the outside diameter of the pipe. WP63J is for 13–63mm, WP110J is for 50–110mm, and WP200J is for 110–200mm pipes.
Is it suitable for field work?
Yes. The manual and portable design makes it suitable for on-site pipe installation and repair work.